Image¶

class
menpo.image.
Image
(image_data, copy=True)[source]¶ Bases:
Vectorizable
,Landmarkable
,Viewable
,LandmarkableViewable
An ndimensional image.
Images are ndimensional homogeneous regular arrays of data. Each spatially distinct location in the array is referred to as a pixel. At a pixel,
k
distinct pieces of information can be stored. Each datum at a pixel is refereed to as being in a channel. All pixels in the image have the same number of channels, and all channels have the same datatype (float64).Parameters:  image_data (
(C, M, N ..., Q)
ndarray) – Array representing the image pixels, with the first axis being channels.  copy (bool, optional) – If
False
, theimage_data
will not be copied on assignment. Note that this will miss out on additional checks. Further note that we still demand that the array is Ccontiguous  if it isn’t, a copy will be generated anyway. In general, this should only be used if you know what you are doing.
Raises: Warning
– Ifcopy=False
cannot be honouredValueError
– If the pixel array is malformed

_view_2d
(figure_id=None, new_figure=False, channels=None, interpolation='bilinear', cmap_name=None, alpha=1.0, render_axes=False, axes_font_name='sansserif', axes_font_size=10, axes_font_style='normal', axes_font_weight='normal', axes_x_limits=None, axes_y_limits=None, axes_x_ticks=None, axes_y_ticks=None, figure_size=(10, 8))[source]¶ View the image using the default image viewer. This method will appear on the Image as
view
if the Image is 2D.Returns:  figure_id (object, optional) – The id of the figure to be used.
 new_figure (bool, optional) – If
True
, a new figure is created.  channels (int or list of int or
all
orNone
) – If int or list of int, the specified channel(s) will be rendered. Ifall
, all the channels will be rendered in subplots. IfNone
and the image is RGB, it will be rendered in RGB mode. IfNone
and the image is not RGB, it is equivalent toall
.  interpolation (See Below, optional) – The interpolation used to render the image. For example, if
bilinear
, the image will be smooth and ifnearest
, the image will be pixelated. Example options{none, nearest, bilinear, bicubic, spline16, spline36, hanning, hamming, hermite, kaiser, quadric, catrom, gaussian, bessel, mitchell, sinc, lanczos}
 cmap_name (str, optional,) – If
None
, single channel and three channel images default to greyscale and rgb colormaps respectively.  alpha (float, optional) – The alpha blending value, between 0 (transparent) and 1 (opaque).
 render_axes (bool, optional) – If
True
, the axes will be rendered.  axes_font_name (See Below, optional) – The font of the axes.
Example options
{serif, sansserif, cursive, fantasy, monospace}
 axes_font_size (int, optional) – The font size of the axes.
 axes_font_style ({
normal
,italic
,oblique
}, optional) – The font style of the axes.  axes_font_weight (See Below, optional) – The font weight of the axes.
Example options
{ultralight, light, normal, regular, book, medium, roman, semibold, demibold, demi, bold, heavy, extra bold, black}
 axes_x_limits (float or (float, float) or
None
, optional) – The limits of the x axis. If float, then it sets padding on the right and left of the Image as a percentage of the Image’s width. If tuple or list, then it defines the axis limits. IfNone
, then the limits are set automatically.  axes_y_limits ((float, float) tuple or
None
, optional) – The limits of the y axis. If float, then it sets padding on the top and bottom of the Image as a percentage of the Image’s height. If tuple or list, then it defines the axis limits. IfNone
, then the limits are set automatically.  axes_x_ticks (list or tuple or
None
, optional) – The ticks of the x axis.  axes_y_ticks (list or tuple or
None
, optional) – The ticks of the y axis.  figure_size ((float, float) tuple or
None
, optional) – The size of the figure in inches.
Returns: viewer (ImageViewer) – The image viewing object.

_view_landmarks_2d
(channels=None, group=None, with_labels=None, without_labels=None, figure_id=None, new_figure=False, interpolation='bilinear', cmap_name=None, alpha=1.0, render_lines=True, line_colour=None, line_style='', line_width=1, render_markers=True, marker_style='o', marker_size=5, marker_face_colour=None, marker_edge_colour=None, marker_edge_width=1.0, render_numbering=False, numbers_horizontal_align='center', numbers_vertical_align='bottom', numbers_font_name='sansserif', numbers_font_size=10, numbers_font_style='normal', numbers_font_weight='normal', numbers_font_colour='k', render_legend=False, legend_title='', legend_font_name='sansserif', legend_font_style='normal', legend_font_size=10, legend_font_weight='normal', legend_marker_scale=None, legend_location=2, legend_bbox_to_anchor=(1.05, 1.0), legend_border_axes_pad=None, legend_n_columns=1, legend_horizontal_spacing=None, legend_vertical_spacing=None, legend_border=True, legend_border_padding=None, legend_shadow=False, legend_rounded_corners=False, render_axes=False, axes_font_name='sansserif', axes_font_size=10, axes_font_style='normal', axes_font_weight='normal', axes_x_limits=None, axes_y_limits=None, axes_x_ticks=None, axes_y_ticks=None, figure_size=(10, 8))[source]¶ Visualize the landmarks. This method will appear on the Image as
view_landmarks
if the Image is 2D.Parameters:  channels (int or list of int or
all
orNone
) – If int or list of int, the specified channel(s) will be rendered. Ifall
, all the channels will be rendered in subplots. IfNone
and the image is RGB, it will be rendered in RGB mode. IfNone
and the image is not RGB, it is equivalent toall
.  group (str or``None`` optional) – The landmark group to be visualized. If
None
and there are more than one landmark groups, an error is raised.  with_labels (
None
or str or list of str, optional) – If notNone
, only show the given label(s). Should not be used with thewithout_labels
kwarg.  without_labels (
None
or str or list of str, optional) – If notNone
, show all except the given label(s). Should not be used with thewith_labels
kwarg.  figure_id (object, optional) – The id of the figure to be used.
 new_figure (bool, optional) – If
True
, a new figure is created.  interpolation (See Below, optional) –
The interpolation used to render the image. For example, if
bilinear
, the image will be smooth and ifnearest
, the image will be pixelated. Example options{none, nearest, bilinear, bicubic, spline16, spline36, hanning, hamming, hermite, kaiser, quadric, catrom, gaussian, bessel, mitchell, sinc, lanczos}
 cmap_name (str, optional,) – If
None
, single channel and three channel images default to greyscale and rgb colormaps respectively.  alpha (float, optional) – The alpha blending value, between 0 (transparent) and 1 (opaque).
 render_lines (bool, optional) – If
True
, the edges will be rendered.  line_colour (See Below, optional) –
The colour of the lines. Example options:
{r, g, b, c, m, k, w} or (3, ) ndarray
 line_style (
{, , ., :}
, optional) – The style of the lines.  line_width (float, optional) – The width of the lines.
 render_markers (bool, optional) – If
True
, the markers will be rendered.  marker_style (See Below, optional) –
The style of the markers. Example options
{., ,, o, v, ^, <, >, +, x, D, d, s, p, *, h, H, 1, 2, 3, 4, 8}
 marker_size (int, optional) – The size of the markers in points.
 marker_face_colour (See Below, optional) –
The face (filling) colour of the markers. Example options
{r, g, b, c, m, k, w} or (3, ) ndarray
 marker_edge_colour (See Below, optional) –
The edge colour of the markers. Example options
{r, g, b, c, m, k, w} or (3, ) ndarray
 marker_edge_width (float, optional) – The width of the markers’ edge.
 render_numbering (bool, optional) – If
True
, the landmarks will be numbered.  numbers_horizontal_align (
{center, right, left}
, optional) – The horizontal alignment of the numbers’ texts.  numbers_vertical_align (
{center, top, bottom, baseline}
, optional) – The vertical alignment of the numbers’ texts.  numbers_font_name (See Below, optional) –
The font of the numbers. Example options
{serif, sansserif, cursive, fantasy, monospace}
 numbers_font_size (int, optional) – The font size of the numbers.
 numbers_font_style (
{normal, italic, oblique}
, optional) – The font style of the numbers.  numbers_font_weight (See Below, optional) –
The font weight of the numbers. Example options
{ultralight, light, normal, regular, book, medium, roman, semibold, demibold, demi, bold, heavy, extra bold, black}
 numbers_font_colour (See Below, optional) –
The font colour of the numbers. Example options
{r, g, b, c, m, k, w} or (3, ) ndarray
 render_legend (bool, optional) – If
True
, the legend will be rendered.  legend_title (str, optional) – The title of the legend.
 legend_font_name (See below, optional) –
The font of the legend. Example options
{serif, sansserif, cursive, fantasy, monospace}
 legend_font_style (
{normal, italic, oblique}
, optional) – The font style of the legend.  legend_font_size (int, optional) – The font size of the legend.
 legend_font_weight (See Below, optional) –
The font weight of the legend. Example options
{ultralight, light, normal, regular, book, medium, roman, semibold, demibold, demi, bold, heavy, extra bold, black}
 legend_marker_scale (float, optional) – The relative size of the legend markers with respect to the original
 legend_location (int, optional) –
The location of the legend. The predefined values are:
‘best’ 0 ‘upper right’ 1 ‘upper left’ 2 ‘lower left’ 3 ‘lower right’ 4 ‘right’ 5 ‘center left’ 6 ‘center right’ 7 ‘lower center’ 8 ‘upper center’ 9 ‘center’ 10  legend_bbox_to_anchor ((float, float) tuple, optional) – The bbox that the legend will be anchored.
 legend_border_axes_pad (float, optional) – The pad between the axes and legend border.
 legend_n_columns (int, optional) – The number of the legend’s columns.
 legend_horizontal_spacing (float, optional) – The spacing between the columns.
 legend_vertical_spacing (float, optional) – The vertical space between the legend entries.
 legend_border (bool, optional) – If
True
, a frame will be drawn around the legend.  legend_border_padding (float, optional) – The fractional whitespace inside the legend border.
 legend_shadow (bool, optional) – If
True
, a shadow will be drawn behind legend.  legend_rounded_corners (bool, optional) – If
True
, the frame’s corners will be rounded (fancybox).  render_axes (bool, optional) – If
True
, the axes will be rendered.  axes_font_name (See Below, optional) –
The font of the axes. Example options
{serif, sansserif, cursive, fantasy, monospace}
 axes_font_size (int, optional) – The font size of the axes.
 axes_font_style (
{normal, italic, oblique}
, optional) – The font style of the axes.  axes_font_weight (See Below, optional) –
The font weight of the axes. Example options
{ultralight, light, normal, regular, book, medium, roman, semibold,demibold, demi, bold, heavy, extra bold, black}
 axes_x_limits (float or (float, float) or
None
, optional) – The limits of the x axis. If float, then it sets padding on the right and left of the Image as a percentage of the Image’s width. If tuple or list, then it defines the axis limits. IfNone
, then the limits are set automatically.  axes_y_limits ((float, float) tuple or
None
, optional) – The limits of the y axis. If float, then it sets padding on the top and bottom of the Image as a percentage of the Image’s height. If tuple or list, then it defines the axis limits. IfNone
, then the limits are set automatically.  axes_x_ticks (list or tuple or
None
, optional) – The ticks of the x axis.  axes_y_ticks (list or tuple or
None
, optional) – The ticks of the y axis.  figure_size ((float, float) tuple or
None
optional) – The size of the figure in inches.
Raises: ValueError
– If bothwith_labels
andwithout_labels
are passed.ValueError
– If the landmark manager doesn’t contain the provided group label.
 channels (int or list of int or

as_PILImage
(out_dtype=<type 'numpy.uint8'>)[source]¶ Return a PIL copy of the image scaled and cast to the correct values for the provided
out_dtype
.Image must only have 1 or 3 channels and be 2 dimensional. Non uint8 floating point images must be in the range
[0, 1]
to be converted.Parameters: out_dtype (np.dtype, optional) – The dtype the output array should be.
Returns: pil_image (PILImage) – PIL copy of image
Raises: ValueError
– If image is not 2D and has 1 channel or 3 channels.ValueError
– If pixels data type is float32 or float64 and the pixel range is outside of[0, 1]
ValueError
– If the output dtype is unsupported. Currently uint8 is supported.

as_greyscale
(mode='luminosity', channel=None)[source]¶ Returns a greyscale version of the image. If the image does not represent a 2D RGB image, then the
luminosity
mode will fail.Parameters:  mode (
{average, luminosity, channel}
, optional) –mode Greyscale Algorithm average Equal average of all channels luminosity Calculates the luminance using the CCIR 601 formula: \[Y' = 0.2989 R' + 0.5870 G' + 0.1140 B'\]channel A specific channel is chosen as the intensity value.  channel (int, optional) – The channel to be taken. Only used if mode is
channel
.
Returns: greyscale_image (
MaskedImage
) – A copy of this image in greyscale. mode (

as_histogram
(keep_channels=True, bins='unique')[source]¶ Histogram binning of the values of this image.
Parameters:  keep_channels (bool, optional) – If set to
False
, it returns a single histogram for all the channels of the image. If set toTrue
, it returns a list of histograms, one for each channel.  bins (
{unique}
, positive int or sequence of scalars, optional) – If set equal to'unique'
, the bins of the histograms are centred on the unique values of each channel. If set equal to a positive int, then this is the number of bins. If set equal to a sequence of scalars, these will be used as bins centres.
Returns:  hist (ndarray or list with
n_channels
ndarrays inside) – The histogram(s). Ifkeep_channels=False
, then hist is an ndarray. Ifkeep_channels=True
, then hist is a list withlen(hist)=n_channels
.  bin_edges (ndarray or list with n_channels ndarrays inside) – An array or a list of arrays corresponding to the above histograms that store the bins’ edges.
Raises: ValueError
– Bins can be either ‘unique’, positive int or a sequence of scalars.Examples
Visualizing the histogram when a list of array bin edges is provided:
>>> hist, bin_edges = image.as_histogram() >>> for k in range(len(hist)): >>> plt.subplot(1,len(hist),k) >>> width = 0.7 * (bin_edges[k][1]  bin_edges[k][0]) >>> centre = (bin_edges[k][:1] + bin_edges[k][1:]) / 2 >>> plt.bar(centre, hist[k], align='center', width=width)
 keep_channels (bool, optional) – If set to

as_imageio
(out_dtype=<type 'numpy.uint8'>)[source]¶ Return an Imageio copy of the image scaled and cast to the correct values for the provided
out_dtype
.Image must only have 1 or 3 channels and be 2 dimensional. Non uint8 floating point images must be in the range
[0, 1]
to be converted.Parameters: out_dtype (np.dtype, optional) – The dtype the output array should be.
Returns: imageio_image (ndarray) – Imageio image (which is just a numpy ndarray with the channels as the last axis).
Raises: ValueError
– If image is not 2D and has 1 channel or 3 channels.ValueError
– If pixels data type is float32 or float64 and the pixel range is outside of[0, 1]
ValueError
– If the output dtype is unsupported. Currently uint8 and uint16 are supported.

as_masked
(mask=None, copy=True)[source]¶ Return a copy of this image with an attached mask behavior.
A custom mask may be provided, or
None
. See theMaskedImage
constructor for details of how the kwargs will be handled.Parameters:  mask (
(self.shape)
ndarray orBooleanImage
) – A mask to attach to the newly generated masked image.  copy (bool, optional) – If
False
, the producedMaskedImage
will share pixels withself
. Only suggested to be used for performance.
Returns: masked_image (
MaskedImage
) – An image with the same pixels and landmarks as this one, but with a mask. mask (

as_vector
(**kwargs)¶ Returns a flattened representation of the object as a single vector.
Returns: vector ((N,) ndarray) – The core representation of the object, flattened into a single vector. Note that this is always a view back on to the original object, but is not writable.

bounds
()[source]¶ The bounds of the image, minimum is always (0, 0). The maximum is the maximum index that can be used to index into the image for each dimension. Therefore, bounds will be of the form: ((0, 0), (self.height  1, self.width  1)) for a 2D image.
Note that this is akin to supporting a nearest neighbour interpolation. Although the actual maximum subpixel value would be something like
self.height  eps
whereeps
is some value arbitrarily close to 0, this value at least allows sampling without worrying about floating point error.Type: tuple

centre
()[source]¶ The geometric centre of the Image  the subpixel that is in the middle.
Useful for aligning shapes and images.
Type: ( n_dims
,) ndarray

constrain_landmarks_to_bounds
()[source]¶ Deprecated  please use the equivalent
constrain_to_bounds
method now on PointCloud, in conjunction with the new Imagebounds()
method. For example:>>> im.constrain_landmarks_to_bounds() # Equivalent to below >>> im.landmarks['test'] = im.landmarks['test'].lms.constrain_to_bounds(im.bounds())

constrain_points_to_bounds
(points)[source]¶ Constrains the points provided to be within the bounds of this image.
Parameters: points ( (d,)
ndarray) – Points to be snapped to the image boundaries.Returns: bounded_points ( (d,)
ndarray) – Points snapped to not stray outside the image edges.

copy
()¶ Generate an efficient copy of this object.
Note that Numpy arrays and other
Copyable
objects onself
will be deeply copied. Dictionaries and sets will be shallow copied, and everything else will be assigned (no copy will be made).Classes that store state other than numpy arrays and immutable types should overwrite this method to ensure all state is copied.
Returns: type(self)
– A copy of this object

crop
(min_indices, max_indices, constrain_to_boundary=False, return_transform=False)[source]¶ Return a cropped copy of this image using the given minimum and maximum indices. Landmarks are correctly adjusted so they maintain their position relative to the newly cropped image.
Parameters:  min_indices (
(n_dims,)
ndarray) – The minimum index over each dimension.  max_indices (
(n_dims,)
ndarray) – The maximum index over each dimension.  constrain_to_boundary (bool, optional) – If
True
the crop will be snapped to not go beyond this images boundary. IfFalse
, anImageBoundaryError
will be raised if an attempt is made to go beyond the edge of the image.  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the cropping is also returned.
Returns:  cropped_image (type(self)) – A new instance of self, but cropped.
 transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
Raises: ValueError
–min_indices
andmax_indices
both have to be of lengthn_dims
. Allmax_indices
must be greater thanmin_indices
.ImageBoundaryError
– Raised ifconstrain_to_boundary=False
, and an attempt is made to crop the image in a way that violates the image bounds.
 min_indices (

crop_to_landmarks
(group=None, boundary=0, constrain_to_boundary=True, return_transform=False)[source]¶ Return a copy of this image cropped so that it is bounded around a set of landmarks with an optional
n_pixel
boundaryParameters:  group (str, optional) – The key of the landmark set that should be used. If
None
and if there is only one set of landmarks, this set will be used.  boundary (int, optional) – An extra padding to be added all around the landmarks bounds.
 constrain_to_boundary (bool, optional) – If
True
the crop will be snapped to not go beyond this images boundary. IfFalse
, an :map`ImageBoundaryError` will be raised if an attempt is made to go beyond the edge of the image.  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the cropping is also returned.
Returns: Raises: ImageBoundaryError
– Raised ifconstrain_to_boundary=False
, and an attempt is made to crop the image in a way that violates the image bounds. group (str, optional) – The key of the landmark set that should be used. If

crop_to_landmarks_proportion
(boundary_proportion, group=None, minimum=True, constrain_to_boundary=True, return_transform=False)[source]¶ Crop this image to be bounded around a set of landmarks with a border proportional to the landmark spread or range.
Parameters:  boundary_proportion (float) – Additional padding to be added all around the landmarks bounds defined as a proportion of the landmarks range. See the minimum parameter for a definition of how the range is calculated.
 group (str, optional) – The key of the landmark set that should be used. If
None
and if there is only one set of landmarks, this set will be used.  minimum (bool, optional) – If
True
the specified proportion is relative to the minimum value of the landmarks’ perdimension range; ifFalse
w.r.t. the maximum value of the landmarks’ perdimension range.  constrain_to_boundary (bool, optional) – If
True
, the crop will be snapped to not go beyond this images boundary. IfFalse
, anImageBoundaryError
will be raised if an attempt is made to go beyond the edge of the image.  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the cropping is also returned.
Returns: Raises: ImageBoundaryError
– Raised ifconstrain_to_boundary=False
, and an attempt is made to crop the image in a way that violates the image bounds.

crop_to_pointcloud
(pointcloud, boundary=0, constrain_to_boundary=True, return_transform=False)[source]¶ Return a copy of this image cropped so that it is bounded around a pointcloud with an optional
n_pixel
boundary.Parameters:  pointcloud (
PointCloud
) – The pointcloud to crop around.  boundary (int, optional) – An extra padding to be added all around the landmarks bounds.
 constrain_to_boundary (bool, optional) – If
True
the crop will be snapped to not go beyond this images boundary. IfFalse
, an :map`ImageBoundaryError` will be raised if an attempt is made to go beyond the edge of the image.  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the cropping is also returned.
Returns: Raises: ImageBoundaryError
– Raised ifconstrain_to_boundary=False
, and an attempt is made to crop the image in a way that violates the image bounds. pointcloud (

crop_to_pointcloud_proportion
(pointcloud, boundary_proportion, minimum=True, constrain_to_boundary=True, return_transform=False)[source]¶ Return a copy of this image cropped so that it is bounded around a pointcloud with an optional
n_pixel
boundary.Parameters:  pointcloud (
PointCloud
) – The pointcloud to crop around.  boundary_proportion (float) – Additional padding to be added all around the landmarks bounds defined as a proportion of the landmarks range. See the minimum parameter for a definition of how the range is calculated.
 minimum (bool, optional) – If
True
the specified proportion is relative to the minimum value of the pointclouds’ perdimension range; ifFalse
w.r.t. the maximum value of the pointclouds’ perdimension range.  constrain_to_boundary (bool, optional) – If
True
, the crop will be snapped to not go beyond this images boundary. IfFalse
, anImageBoundaryError
will be raised if an attempt is made to go beyond the edge of the image.  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the cropping is also returned.
Returns: Raises: ImageBoundaryError
– Raised ifconstrain_to_boundary=False
, and an attempt is made to crop the image in a way that violates the image bounds. pointcloud (

extract_channels
(channels)[source]¶ A copy of this image with only the specified channels.
Parameters: channels (int or [int]) – The channel index or list of channel indices to retain. Returns: image (type(self)) – A copy of this image with only the channels requested.

extract_patches
(patch_centers, patch_shape=(16, 16), sample_offsets=None, as_single_array=True)[source]¶ Extract a set of patches from an image. Given a set of patch centers and a patch size, patches are extracted from within the image, centred on the given coordinates. Sample offsets denote a set of offsets to extract from within a patch. This is very useful if you want to extract a dense set of features around a set of landmarks and simply sample the same grid of patches around the landmarks.
If sample offsets are used, to access the offsets for each patch you need to slice the resulting list. So for 2 offsets, the first centers offset patches would be
patches[:2]
.Currently only 2D images are supported.
Parameters:  patch_centers (
PointCloud
) – The centers to extract patches around.  patch_shape (
(1, n_dims)
tuple or ndarray, optional) – The size of the patch to extract  sample_offsets (
(n_offsets, n_dims)
ndarray orNone
, optional) – The offsets to sample from within a patch. So(0, 0)
is the centre of the patch (no offset) and(1, 0)
would be sampling the patch from 1 pixel up the first axis away from the centre. IfNone
, then no offsets are applied.  as_single_array (bool, optional) – If
True
, an(n_center, n_offset, n_channels, patch_shape)
ndarray, thus a single numpy array is returned containing each patch. IfFalse
, a list ofn_center * n_offset
Image
objects is returned representing each patch.
Returns: patches (list or ndarray) – Returns the extracted patches. Returns a list if
as_single_array=True
and an ndarray ifas_single_array=False
.Raises: ValueError
– If image is not 2D patch_centers (

extract_patches_around_landmarks
(group=None, patch_shape=(16, 16), sample_offsets=None, as_single_array=True)[source]¶ Extract patches around landmarks existing on this image. Provided the group label and optionally the landmark label extract a set of patches.
See extract_patches for more information.
Currently only 2D images are supported.
Parameters:  group (str or
None
, optional) – The landmark group to use as patch centres.  patch_shape (tuple or ndarray, optional) – The size of the patch to extract
 sample_offsets (
(n_offsets, n_dims)
ndarray orNone
, optional) – The offsets to sample from within a patch. So(0, 0)
is the centre of the patch (no offset) and(1, 0)
would be sampling the patch from 1 pixel up the first axis away from the centre. IfNone
, then no offsets are applied.  as_single_array (bool, optional) – If
True
, an(n_center, n_offset, n_channels, patch_shape)
ndarray, thus a single numpy array is returned containing each patch. IfFalse
, a list ofn_center * n_offset
Image
objects is returned representing each patch.
Returns: patches (list or ndarray) – Returns the extracted patches. Returns a list if
as_single_array=True
and an ndarray ifas_single_array=False
.Raises: ValueError
– If image is not 2D group (str or

from_vector
(vector, n_channels=None, copy=True)[source]¶ Takes a flattened vector and returns a new image formed by reshaping the vector to the correct pixels and channels.
The n_channels argument is useful for when we want to add an extra channel to an image but maintain the shape. For example, when calculating the gradient.
Note that landmarks are transferred in the process.
Parameters:  vector (
(n_parameters,)
ndarray) – A flattened vector of all pixels and channels of an image.  n_channels (int, optional) – If given, will assume that vector is the same shape as this image, but with a possibly different number of channels.
 copy (bool, optional) – If
False
, the vector will not be copied in creating the new image.
Returns: image (
Image
) – New image of same shape as this image and the number of specified channels.Raises: Warning
– If thecopy=False
flag cannot be honored vector (

from_vector_inplace
(vector)¶ Deprecated. Use the nonmutating API,
from_vector
.For internal usage in performancesensitive spots, see _from_vector_inplace()
Parameters: vector ( (n_parameters,)
ndarray) – Flattened representation of this object

gaussian_pyramid
(n_levels=3, downscale=2, sigma=None)[source]¶ Return the gaussian pyramid of this image. The first image of the pyramid will be a copy of the original, unmodified, image, and counts as level 1.
Parameters:  n_levels (int, optional) – Total number of levels in the pyramid, including the original unmodified image
 downscale (float, optional) – Downscale factor.
 sigma (float, optional) – Sigma for gaussian filter. Default is
downscale / 3.
which corresponds to a filter mask twice the size of the scale factor that covers more than 99% of the gaussian distribution.
Yields: image_pyramid (generator) – Generator yielding pyramid layers as
Image
objects.

has_landmarks_outside_bounds
()[source]¶ Indicates whether there are landmarks located outside the image bounds.
Type: bool

has_nan_values
()¶ Tests if the vectorized form of the object contains
nan
values or not. This is particularly useful for objects with unknown values that have been mapped tonan
values.Returns: has_nan_values (bool) – If the vectorized object contains nan
values.

classmethod
init_blank
(shape, n_channels=1, fill=0, dtype=<type 'float'>)[source]¶ Returns a blank image.
Parameters:  shape (tuple or list) – The shape of the image. Any floating point values are rounded up to the nearest integer.
 n_channels (int, optional) – The number of channels to create the image with.
 fill (int, optional) – The value to fill all pixels with.
 dtype (numpy data type, optional) – The data type of the image.
Returns: blank_image (
Image
) – A new image of the requested size.

classmethod
init_from_channels_at_back
(pixels)[source]¶ Create an Image from a set of pixels where the channels axis is on the last axis (the back). This is common in other frameworks, and therefore this method provides a convenient means of creating a menpo Image from such data. Note that a copy is always created due to the need to rearrange the data.
Parameters: pixels ( (M, N ..., Q, C)
ndarray) – Array representing the image pixels, with the last axis being channels.Returns: image ( Image
) – A new image from the given pixels, with the FIRST axis as the channels.Raises: ValueError
– If image is not at least 2D, i.e. has at least 2 dimensions plus the channels in the end.

classmethod
init_from_pointcloud
(pointcloud, group=None, boundary=0, n_channels=1, fill=0, dtype=<type 'float'>, return_transform=False)[source]¶ Create an Image that is big enough to contain the given pointcloud. The pointcloud will be translated to the origin and then translated according to its bounds in order to fit inside the new image. An optional boundary can be provided in order to increase the space around the boundary of the pointcloud. The boundary will be added to all sides of the image and so a boundary of 5 provides 10 pixels of boundary total for each dimension.
Parameters:  pointcloud (
PointCloud
) – Pointcloud to place inside the newly created image.  group (str, optional) – If
None
, the pointcloud will only be used to create the image. If a str then the pointcloud will be attached as a landmark group to the image, with the given string as key.  boundary (float) – A optional padding distance that is added to the pointcloud bounds.
Default is
0
, meaning the max/min of tightest possible containing image is returned.  n_channels (int, optional) – The number of channels to create the image with.
 fill (int, optional) – The value to fill all pixels with.
 dtype (numpy data type, optional) – The data type of the image.
 return_transform (bool, optional) – If
True
, then theTransform
object that was used to adjust the PointCloud in order to build the image, is returned.
Returns:  image (
type(cls)
Image or subclass) – A new image with the same size as the given pointcloud, optionally with the pointcloud attached as landmarks.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
 pointcloud (

classmethod
init_from_rolled_channels
(pixels)[source]¶ Deprecated  please use the equivalent
init_from_channels_at_back
method.

mirror
(axis=1, return_transform=False)[source]¶ Return a copy of this image, mirrored/flipped about a certain axis.
Parameters:  axis (int, optional) – The axis about which to mirror the image.
 return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the mirroring is also returned.
Returns:  mirrored_image (
type(self)
) – The mirrored image.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
Raises: ValueError
– axis cannot be negativeValueError
– axis={} but the image has {} dimensions

normalize_norm
(mode='all', **kwargs)[source]¶ Returns a copy of this image normalized such that its pixel values have zero mean and its norm equals 1.
Parameters: mode ( {all, per_channel}
, optional) – Ifall
, the normalization is over all channels. Ifper_channel
, each channel individually is mean centred and unit norm.Returns: image ( type(self)
) – A copy of this image, normalized.

normalize_std
(mode='all', **kwargs)[source]¶ Returns a copy of this image normalized such that its pixel values have zero mean and unit variance.
Parameters: mode ( {all, per_channel}
, optional) – Ifall
, the normalization is over all channels. Ifper_channel
, each channel individually is mean centred and normalized in variance.Returns: image ( type(self)
) – A copy of this image, normalized.

pixels_range
()[source]¶ The range of the pixel values (min and max pixel values).
Returns: min_max ( (dtype, dtype)
) – The minimum and maximum value of the pixels array.

pixels_with_channels_at_back
(out_dtype=None)[source]¶ Returns the pixels matrix, with the channels rolled to the back axis. This may be required for interacting with external code bases that require images to have channels as the last axis, rather than the Menpo convention of channels as the first axis.
If this image is single channel, the final axis is dropped.
Parameters: out_dtype (np.dtype, optional) – The dtype the output array should be. Returns: rolled_channels (ndarray) – Pixels with channels as the back (last) axis. If single channel, the last axis will be dropped.

pyramid
(n_levels=3, downscale=2)[source]¶ Return a rescaled pyramid of this image. The first image of the pyramid will be a copy of the original, unmodified, image, and counts as level 1.
Parameters:  n_levels (int, optional) – Total number of levels in the pyramid, including the original unmodified image
 downscale (float, optional) – Downscale factor.
Yields: image_pyramid (generator) – Generator yielding pyramid layers as
Image
objects.

rasterize_landmarks
(group=None, render_lines=True, line_style='', line_colour='b', line_width=1, render_markers=True, marker_style='o', marker_size=1, marker_face_colour='b', marker_edge_colour='b', marker_edge_width=1, backend='matplotlib')[source]¶ This method provides the ability to rasterize 2D landmarks onto the image. The returned image has the specified landmark groups rasterized onto the image  which is useful for things like creating result examples or rendering videos with annotations.
Since multiple landmark groups can be specified, all arguments can take lists of parameters that map to the provided groups list. Therefore, the parameters must be lists of the correct length or a single parameter to apply to every landmark group.
Multiple backends are provided, all with different strengths. The ‘pillow’ backend is very fast, but not very flexible. The matplotlib backend should be feature compatible with other Menpo rendering methods, but is much slower due to the overhead of creating a figure to render into.
Parameters:  group (str or list of str, optional) – The landmark group key, or a list of keys.
 render_lines (bool, optional) – If
True
, and the provided landmark group is aPointDirectedGraph
, the edges are rendered.  line_style (str, optional) – The style of the edge line. Not all backends support this argument.
 line_colour (str or tuple, optional) – A Matplotlib style colour or a backend dependant colour.
 line_width (int, optional) – The width of the line to rasterize.
 render_markers (bool, optional) – If
True
, render markers at the coordinates of each landmark.  marker_style (str, optional) – A Matplotlib marker style. Not all backends support all marker styles.
 marker_size (int, optional) – The size of the marker  different backends use different scale spaces so consistent output may by difficult.
 marker_face_colour (str, optional) – A Matplotlib style colour or a backend dependant colour.
 marker_edge_colour (str, optional) – A Matplotlib style colour or a backend dependant colour.
 marker_edge_width (int, optional) – The width of the marker edge. Not all backends support this.
 backend ({'matplotlib', 'pillow'}, optional) – The backend to use.
Returns: rasterized_image (
Image
) – The image with the landmarks rasterized directly into the pixels.Raises: ValueError
– Only 2D images are supported.ValueError
– Only RGB (3channel) or Greyscale (1channel) images are supported.

rescale
(scale, round='ceil', order=1, return_transform=False)[source]¶ Return a copy of this image, rescaled by a given factor. Landmarks are rescaled appropriately.
Parameters:  scale (float or tuple of floats) – The scale factor. If a tuple, the scale to apply to each dimension. If a single float, the scale will be applied uniformly across each dimension.
 round (
{ceil, floor, round}
, optional) – Rounding function to be applied to floating point shapes.  order (int, optional) –
The order of interpolation. The order has to be in the range [0,5]
Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the rescale is also returned.
Returns:  rescaled_image (
type(self)
) – A copy of this image, rescaled.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
Raises: ValueError: – If less scales than dimensions are provided. If any scale is less than or equal to 0.

rescale_landmarks_to_diagonal_range
(diagonal_range, group=None, round='ceil', order=1, return_transform=False)[source]¶ Return a copy of this image, rescaled so that the
diagonal_range
of the bounding box containing its landmarks matches the specifieddiagonal_range
range.Parameters:  diagonal_range (
(n_dims,)
ndarray) – The diagonal_range range that we want the landmarks of the returned image to have.  group (str, optional) – The key of the landmark set that should be used. If
None
and if there is only one set of landmarks, this set will be used.  round (
{ceil, floor, round}
, optional) – Rounding function to be applied to floating point shapes.  order (int, optional) –
The order of interpolation. The order has to be in the range [0,5]
Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the rescale is also returned.
Returns:  rescaled_image (
type(self)
) – A copy of this image, rescaled.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
 diagonal_range (

rescale_pixels
(minimum, maximum, per_channel=True)[source]¶ A copy of this image with pixels linearly rescaled to fit a range.
Note that the only pixels that will considered and rescaled are those that feature in the vectorized form of this image. If you want to use this routine on all the pixels in a
MaskedImage
, consider using as_unmasked() prior to this call.Parameters:  minimum (float) – The minimal value of the rescaled pixels
 maximum (float) – The maximal value of the rescaled pixels
 per_channel (boolean, optional) – If
True
, each channel will be rescaled independently. IfFalse
, the scaling will be over all channels.
Returns: rescaled_image (
type(self)
) – A copy of this image with pixels linearly rescaled to fit in the range provided.

rescale_to_diagonal
(diagonal, round='ceil', return_transform=False)[source]¶ Return a copy of this image, rescaled so that the it’s diagonal is a new size.
Parameters:  diagonal (int) – The diagonal size of the new image.
 round (
{ceil, floor, round}
, optional) – Rounding function to be applied to floating point shapes.  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the rescale is also returned.
Returns:  rescaled_image (type(self)) – A copy of this image, rescaled.
 transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.

rescale_to_pointcloud
(pointcloud, group=None, round='ceil', order=1, return_transform=False)[source]¶ Return a copy of this image, rescaled so that the scale of a particular group of landmarks matches the scale of the passed reference pointcloud.
Parameters:  pointcloud (
PointCloud
) – The reference pointcloud to which the landmarks specified bygroup
will be scaled to match.  group (str, optional) – The key of the landmark set that should be used. If
None
, and if there is only one set of landmarks, this set will be used.  round (
{ceil, floor, round}
, optional) – Rounding function to be applied to floating point shapes.  order (int, optional) –
The order of interpolation. The order has to be in the range [0,5]
Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the rescale is also returned.
Returns:  rescaled_image (
type(self)
) – A copy of this image, rescaled.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
 pointcloud (

resize
(shape, order=1, return_transform=False)[source]¶ Return a copy of this image, resized to a particular shape. All image information (landmarks, and mask in the case of
MaskedImage
) is resized appropriately.Parameters:  shape (tuple) – The new shape to resize to.
 order (int, optional) –
The order of interpolation. The order has to be in the range [0,5]
Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the resize is also returned.
Returns:  resized_image (
type(self)
) – A copy of this image, resized.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
Raises: ValueError: – If the number of dimensions of the new shape does not match the number of dimensions of the image.

rolled_channels
()[source]¶ Deprecated  please use the equivalent
pixels_with_channels_at_back
method.

rotate_ccw_about_centre
(theta, degrees=True, retain_shape=False, cval=0.0, round='round', order=1, return_transform=False)[source]¶ Return a copy of this image, rotated counterclockwise about its centre.
Note that the retain_shape argument defines the shape of the rotated image. If
retain_shape=True
, then the shape of the rotated image will be the same as the one of current image, so some regions will probably be cropped. Ifretain_shape=False
, then the returned image has the correct size so that the whole area of the current image is included.Parameters:  theta (float) – The angle of rotation about the centre.
 degrees (bool, optional) – If
True
, theta is interpreted in degrees. IfFalse
,theta
is interpreted as radians.  retain_shape (bool, optional) – If
True
, then the shape of the rotated image will be the same as the one of current image, so some regions will probably be cropped. IfFalse
, then the returned image has the correct size so that the whole area of the current image is included.  cval (float, optional) – The value to be set outside the rotated image boundaries.
 round (
{'ceil', 'floor', 'round'}
, optional) – Rounding function to be applied to floating point shapes. This is only used in caseretain_shape=True
.  order (int, optional) –
The order of interpolation. The order has to be in the range
[0,5]
. This is only used in caseretain_shape=True
.Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the rotation is also returned.
Returns:  rotated_image (
type(self)
) – The rotated image.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
Raises: ValueError
– Image rotation is presently only supported on 2D images

sample
(points_to_sample, order=1, mode='constant', cval=0.0)[source]¶ Sample this image at the given subpixel accurate points. The input PointCloud should have the same number of dimensions as the image e.g. a 2D PointCloud for a 2D multichannel image. A numpy array will be returned the has the values for every given point across each channel of the image.
Parameters:  points_to_sample (
PointCloud
) – Array of points to sample from the image. Should be (n_points, n_dims)  order (int, optional) – The order of interpolation. The order has to be in the range [0,5]. See warp_to_shape for more information.
 mode (
{constant, nearest, reflect, wrap}
, optional) – Points outside the boundaries of the input are filled according to the given mode.  cval (float, optional) – Used in conjunction with mode
constant
, the value outside the image boundaries.
Returns: sampled_pixels ((n_points, n_channels) ndarray) – The interpolated values taken across every channel of the image.
 points_to_sample (

set_patches
(patches, patch_centers, offset=None, offset_index=None)[source]¶ Set the values of a group of patches into the correct regions of a copy of this image. Given an array of patches and a set of patch centers, the patches’ values are copied in the regions of the image that are centred on the coordinates of the given centers.
The patches argument can have any of the two formats that are returned from the extract_patches() and extract_patches_around_landmarks() methods. Specifically it can be:
(n_center, n_offset, self.n_channels, patch_shape)
ndarray list of
n_center * n_offset
Image
objects
Currently only 2D images are supported.
Parameters:  patches (ndarray or list) – The values of the patches. It can have any of the two formats that
are returned from the extract_patches() and
extract_patches_around_landmarks() methods. Specifically, it can
either be an
(n_center, n_offset, self.n_channels, patch_shape)
ndarray or a list ofn_center * n_offset
Image
objects.  patch_centers (
PointCloud
) – The centers to set the patches around.  offset (list or tuple or
(1, 2)
ndarray orNone
, optional) – The offset to apply on the patch centers within the image. IfNone
, then(0, 0)
is used.  offset_index (int or
None
, optional) – The offset index within the provided patches argument, thus the index of the second dimension from which to sample. IfNone
, then0
is used.
Raises: ValueError
– If image is not 2DValueError
– If offset does not have shape (1, 2)

set_patches_around_landmarks
(patches, group=None, offset=None, offset_index=None)[source]¶ Set the values of a group of patches around the landmarks existing in a copy of this image. Given an array of patches, a group and a label, the patches’ values are copied in the regions of the image that are centred on the coordinates of corresponding landmarks.
The patches argument can have any of the two formats that are returned from the extract_patches() and extract_patches_around_landmarks() methods. Specifically it can be:
(n_center, n_offset, self.n_channels, patch_shape)
ndarray list of
n_center * n_offset
Image
objects
Currently only 2D images are supported.
Parameters:  patches (ndarray or list) – The values of the patches. It can have any of the two formats that
are returned from the extract_patches() and
extract_patches_around_landmarks() methods. Specifically, it can
either be an
(n_center, n_offset, self.n_channels, patch_shape)
ndarray or a list ofn_center * n_offset
Image
objects.  group (str or
None
optional) – The landmark group to use as patch centres.  offset (list or tuple or
(1, 2)
ndarray orNone
, optional) – The offset to apply on the patch centers within the image. IfNone
, then(0, 0)
is used.  offset_index (int or
None
, optional) – The offset index within the provided patches argument, thus the index of the second dimension from which to sample. IfNone
, then0
is used.
Raises: ValueError
– If image is not 2DValueError
– If offset does not have shape (1, 2)

transform_about_centre
(transform, retain_shape=False, cval=0.0, round='round', order=1, return_transform=False)[source]¶ Return a copy of this image, transformed about its centre.
Note that the retain_shape argument defines the shape of the transformed image. If
retain_shape=True
, then the shape of the transformed image will be the same as the one of current image, so some regions will probably be cropped. Ifretain_shape=False
, then the returned image has the correct size so that the whole area of the current image is included.Note
This method will not work for transforms that result in a transform chain as
TransformChain
is not invertible.Note
Be careful when defining transforms for warping imgaes. All pixel locations must fall within a valid range as expected by the transform. Therefore, your transformation must accept ‘negative’ pixel locations as the pixel locations provided to your transform will have the object centre subtracted from them.
Parameters:  transform (
ComposableTransform
andVInvertible
type) – A composable transform.pseudoinverse
will be invoked on the resulting transform so it must implement a valid inverse.  retain_shape (bool, optional) – If
True
, then the shape of the sheared image will be the same as the one of current image, so some regions will probably be cropped. IfFalse
, then the returned image has the correct size so that the whole area of the current image is included.  cval (float, optional) – The value to be set outside the sheared image boundaries.
 round (
{'ceil', 'floor', 'round'}
, optional) – Rounding function to be applied to floating point shapes. This is only used in caseretain_shape=True
.  order (int, optional) –
The order of interpolation. The order has to be in the range
[0,5]
. This is only used in caseretain_shape=True
.Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the shearing is also returned.
Returns:  transformed_image (
type(self)
) – The transformed image.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
Examples
This is an example for rotating an image about its center. Let’s first load an image, create the rotation transform and then apply it
import matplotlib.pyplot as plt import menpo.io as mio from menpo.transform import Rotation # Load image im = mio.import_builtin_asset.lenna_png() # Create shearing transform rot_tr = Rotation.init_from_2d_ccw_angle(45) # Render original image plt.subplot(131) im.view_landmarks() plt.title('Original') # Render rotated image plt.subplot(132) im.transform_about_centre(rot_tr).view_landmarks() plt.title('Rotated') # Render rotated image that has shape equal as original image plt.subplot(133) im.transform_about_centre(rot_tr, retain_shape=True).view_landmarks() plt.title('Rotated (Retain original shape)')
Similarly, in order to apply a shear transform
import matplotlib.pyplot as plt import menpo.io as mio from menpo.transform import Affine # Load image im = mio.import_builtin_asset.lenna_png() # Create shearing transform shear_tr = Affine.init_from_2d_shear(25, 10) # Render original image plt.subplot(131) im.view_landmarks() plt.title('Original') # Render sheared image plt.subplot(132) im.transform_about_centre(shear_tr).view_landmarks() plt.title('Sheared') # Render sheared image that has shape equal as original image plt.subplot(133) im.transform_about_centre(shear_tr, retain_shape=True).view_landmarks() plt.title('Sheared (Retain original shape)')
 transform (

view_widget
(browser_style='buttons', figure_size=(10, 8), style='coloured')[source]¶ Visualizes the image object using an interactive widget. Currently only supports the rendering of 2D images.
Parameters:  browser_style ({
'buttons'
,'slider'
}, optional) – It defines whether the selector of the images will have the form of plus/minus buttons or a slider.  figure_size ((int, int), optional) – The initial size of the rendered figure.
 style ({
'coloured'
,'minimal'
}, optional) – If'coloured'
, then the style of the widget will be coloured. Ifminimal
, then the style is simple using black and white colours.
 browser_style ({

warp_to_mask
(template_mask, transform, warp_landmarks=True, order=1, mode='constant', cval=0.0, batch_size=None, return_transform=False)[source]¶ Return a copy of this image warped into a different reference space.
Note that warping into a mask is slower than warping into a full image. If you don’t need a nonlinear mask, consider :meth:
warp_to_shape
instead.Parameters:  template_mask (
BooleanImage
) – Defines the shape of the result, and what pixels should be sampled.  transform (
Transform
) – Transform from the template space back to this image. Defines, for each pixel location on the template, which pixel location should be sampled from on this image.  warp_landmarks (bool, optional) – If
True
, result will have the same landmark dictionary asself
, but with each landmark updated to the warped position.  order (int, optional) –
The order of interpolation. The order has to be in the range [0,5]
Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  mode (
{constant, nearest, reflect, wrap}
, optional) – Points outside the boundaries of the input are filled according to the given mode.  cval (float, optional) – Used in conjunction with mode
constant
, the value outside the image boundaries.  batch_size (int or
None
, optional) – This should only be considered for large images. Setting this value can cause warping to become much slower, particular for cached warps such as Piecewise Affine. This size indicates how many points in the image should be warped at a time, which keeps memory usage low. IfNone
, no batching is used and all points are warped at once.  return_transform (bool, optional) – This argument is for internal use only. If
True
, then theTransform
object is also returned.
Returns:  warped_image (
MaskedImage
) – A copy of this image, warped.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
 template_mask (

warp_to_shape
(template_shape, transform, warp_landmarks=True, order=1, mode='constant', cval=0.0, batch_size=None, return_transform=False)[source]¶ Return a copy of this image warped into a different reference space.
Parameters:  template_shape (tuple or ndarray) – Defines the shape of the result, and what pixel indices should be sampled (all of them).
 transform (
Transform
) – Transform from the template_shape space back to this image. Defines, for each index on template_shape, which pixel location should be sampled from on this image.  warp_landmarks (bool, optional) – If
True
, result will have the same landmark dictionary as self, but with each landmark updated to the warped position.  order (int, optional) –
The order of interpolation. The order has to be in the range [0,5]
Order Interpolation 0 Nearestneighbor 1 Bilinear (default) 2 Biquadratic 3 Bicubic 4 Biquartic 5 Biquintic  mode (
{constant, nearest, reflect, wrap}
, optional) – Points outside the boundaries of the input are filled according to the given mode.  cval (float, optional) – Used in conjunction with mode
constant
, the value outside the image boundaries.  batch_size (int or
None
, optional) – This should only be considered for large images. Setting this value can cause warping to become much slower, particular for cached warps such as Piecewise Affine. This size indicates how many points in the image should be warped at a time, which keeps memory usage low. IfNone
, no batching is used and all points are warped at once.  return_transform (bool, optional) – This argument is for internal use only. If
True
, then theTransform
object is also returned.
Returns:  warped_image (type(self)) – A copy of this image, warped.
 transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.

zoom
(scale, cval=0.0, return_transform=False)[source]¶ Return a copy of this image, zoomed about the centre point.
scale
values greater than 1.0 denote zooming in to the image and values less than 1.0 denote zooming out of the image. The size of the image will not change, if you wish to scale an image, please seerescale()
.Parameters:  scale (float) –
scale > 1.0
denotes zooming in. Thus the image will appear larger and areas at the edge of the zoom will be ‘cropped’ out.scale < 1.0
denotes zooming out. The image will be padded by the value ofcval
.  cval (
float
, optional) – The value to be set outside the zoomed image boundaries.  return_transform (bool, optional) – If
True
, then theTransform
object that was used to perform the zooming is also returned.
Returns:  zoomed_image (
type(self)
) – A copy of this image, zoomed.  transform (
Transform
) – The transform that was used. It only applies if return_transform isTrue
.
 scale (float) –

has_landmarks
¶ Whether the object has landmarks.
Type: bool

height
¶ The height of the image.
This is the height according to image semantics, and is thus the size of the second to last dimension.
Type: int

landmarks
¶ The landmarks object.
Type: LandmarkManager

n_channels
¶ The number of channels on each pixel in the image.
Type: int

n_dims
¶ The number of dimensions in the image. The minimum possible
n_dims
is 2.Type: int

n_elements
¶ Total number of data points in the image
(prod(shape), n_channels)
Type: int

n_landmark_groups
¶ The number of landmark groups on this object.
Type: int

n_parameters
¶ The length of the vector that this object produces.
Type: int

n_pixels
¶ Total number of pixels in the image
(prod(shape),)
Type: int

shape
¶ The shape of the image (with
n_channel
values at each point).Type: tuple

width
¶ The width of the image.
This is the width according to image semantics, and is thus the size of the last dimension.
Type: int
 image_data (